Fluticasonedosage

60 ACTUAT fluticasone propionate 0.113 MG/ACTUAT / salmeterol 0.014 MG/ACTUAT Dry Powder Inhaler

Dosage and administration

For oral inhalation only. Starting dosage is based on prior asthma therapy and disease severity. 1 inhalation of Fluticasone Propionate/Salmeterol 55 mcg/14 mcg, 113 mcg/14 mcg, or 232 mcg/14 mcg twice daily. Do not use with a spacer or volume holding chamber.

2.1 Administration

Instructions Fluticasone Propionate/Salmeterol MDPI is for oral inhalation and does not require priming. Do not use Fluticasone Propionate/Salmeterol MDPI with a spacer or volume holding chamber. Do not use more than two times every 24 hours. More frequent administration or a greater number of daily inhalations (more than one inhalation twice daily) is not recommended as some patients are more likely to experience adverse reactions with higher salmeterol dosages. Avoid the concomitant use of other long acting beta 2 -adrenergic agonist (LABAs). If asthma symptoms arise in the period between doses, an inhaled, short-acting beta 2 -agonist should be taken for immediate relief.

2.2 Recommended

Dosage Administer 1 inhalation of Fluticasone Propionate/Salmeterol MDPI twice daily by oral inhalation (approximately 12 hours apart at the same time every day). Rinse the mouth with water without swallowing after each inhalation. Dosage Selection The recommended starting dosage for Fluticasone Propionate/Salmeterol MDPI is based on asthma severity and current inhaled corticosteroid use and strength. Patients not taking inhaled corticosteroids (ICS) (with less severe asthma): 1 inhalation of 55 mcg/14 mcg Fluticasone Propionate/Salmeterol MDPI dose strength (55 mcg of fluticasone propionate and 14 mcg of salmeterol), twice daily by oral inhalation. Patients with greater asthma severity, use the higher dose strengths: 1 inhalation of 113 mcg/14 mcg Fluticasone Propionate/Salmeterol MDPI (113 mcg of fluticasone propionate and 14 mcg of salmeterol) twice daily; or 1 inhalation of 232 mcg/14 mcg Fluticasone Propionate/Salmeterol MDPI (232 mcg of fluticasone propionate and 14 mcg of salmeterol) twice daily Patients switching to Fluticasone Propionate/Salmeterol MDPI from another inhaled corticosteroid or combination product: 1 inhalation of low (55 mcg/14 mcg), medium (113 mcg/14 mcg) or high (232 mcg/14 mcg) Fluticasone Propionate/Salmeterol MDPI twice daily by oral inhalation based on the strength of the previous inhaled corticosteroid product, or the strength of the inhaled corticosteroid from a combination product, and disease severity. The maximum recommended dosage of Fluticasone Propionate/Salmeterol MDPI is 232 mcg/14 mcg twice daily. General Dosing Information Improvement in asthma control following Fluticasone Propionate/Salmeterol MDPI administration can occur within 15 minutes of beginning treatment; although maximum benefit may not be achieved for 1 week or longer after starting treatment. Individual patients will experience a variable time to onset and degree of symptom relief. For patients who do not respond adequately to the starting dose of Fluticasone Propionate/Salmeterol MDPI after 2 weeks of therapy, consider increasing the strength (replace with higher strength) to possibly provide additional improvement in asthma control. If a previously effective dosage regimen fails to provide adequate improvement in asthma control, re-evaluate the therapeutic regimen, including patient compliance and inhaler technique, and consider additional therapeutic options (e.g., increasing the dose of Fluticasone Propionate/Salmeterol MDPI with a higher strength, adding additional controller therapies). After asthma stability has been achieved, it is desirable to titrate to the lowest effective dosage to reduce the risk of adverse reactions.

2.3 Storing and

Cleaning the Inhaler Keep the inhaler in a cool dry place. Routine maintenance is not required. If the mouthpiece needs cleaning, gently wipe the mouthpiece with a dry cloth or tissue as needed. Never wash or put any part of the inhaler in water.

2.4 Dose Counter

The Fluticasone Propionate/Salmeterol MDPI has a dose counter: The number 60 is displayed (prior to use). The dose counter will count down each time the mouthpiece is opened and closed.

2.1 Administration

Instructions Fluticasone Propionate/Salmeterol MDPI is for oral inhalation and does not require priming. Do not use Fluticasone Propionate/Salmeterol MDPI with a spacer or volume holding chamber. Do not use more than two times every 24 hours. More frequent administration or a greater number of daily inhalations (more than one inhalation twice daily) is not recommended as some patients are more likely to experience adverse reactions with higher salmeterol dosages. Avoid the concomitant use of other long acting beta 2 -adrenergic agonist (LABAs). If asthma symptoms arise in the period between doses, an inhaled, short-acting beta 2 -agonist should be taken for immediate relief.

2.2 Recommended

Dosage Administer 1 inhalation of Fluticasone Propionate/Salmeterol MDPI twice daily by oral inhalation (approximately 12 hours apart at the same time every day). Rinse the mouth with water without swallowing after each inhalation. Dosage Selection The recommended starting dosage for Fluticasone Propionate/Salmeterol MDPI is based on asthma severity and current inhaled corticosteroid use and strength. Patients not taking inhaled corticosteroids (ICS) (with less severe asthma): 1 inhalation of 55 mcg/14 mcg Fluticasone Propionate/Salmeterol MDPI dose strength (55 mcg of fluticasone propionate and 14 mcg of salmeterol), twice daily by oral inhalation. Patients with greater asthma severity, use the higher dose strengths: 1 inhalation of 113 mcg/14 mcg Fluticasone Propionate/Salmeterol MDPI (113 mcg of fluticasone propionate and 14 mcg of salmeterol) twice daily; or 1 inhalation of 232 mcg/14 mcg Fluticasone Propionate/Salmeterol MDPI (232 mcg of fluticasone propionate and 14 mcg of salmeterol) twice daily Patients switching to Fluticasone Propionate/Salmeterol MDPI from another inhaled corticosteroid or combination product: 1 inhalation of low (55 mcg/14 mcg), medium (113 mcg/14 mcg) or high (232 mcg/14 mcg) Fluticasone Propionate/Salmeterol MDPI twice daily by oral inhalation based on the strength of the previous inhaled corticosteroid product, or the strength of the inhaled corticosteroid from a combination product, and disease severity. The maximum recommended dosage of Fluticasone Propionate/Salmeterol MDPI is 232 mcg/14 mcg twice daily. General Dosing Information Improvement in asthma control following Fluticasone Propionate/Salmeterol MDPI administration can occur within 15 minutes of beginning treatment; although maximum benefit may not be achieved for 1 week or longer after starting treatment. Individual patients will experience a variable time to onset and degree of symptom relief. For patients who do not respond adequately to the starting dose of Fluticasone Propionate/Salmeterol MDPI after 2 weeks of therapy, consider increasing the strength (replace with higher strength) to possibly provide additional improvement in asthma control. If a previously effective dosage regimen fails to provide adequate improvement in asthma control, re-evaluate the therapeutic regimen, including patient compliance and inhaler technique, and consider additional therapeutic options (e.g., increasing the dose of Fluticasone Propionate/Salmeterol MDPI with a higher strength, adding additional controller therapies). After asthma stability has been achieved, it is desirable to titrate to the lowest effective dosage to reduce the risk of adverse reactions.

2.3 Storing and

Cleaning the Inhaler Keep the inhaler in a cool dry place. Routine maintenance is not required. If the mouthpiece needs cleaning, gently wipe the mouthpiece with a dry cloth or tissue as needed. Never wash or put any part of the inhaler in water.

2.4 Dose Counter

The Fluticasone Propionate/Salmeterol MDPI has a dose counter: The number 60 is displayed (prior to use). The dose counter will count down each time the mouthpiece is opened and closed.

Text above is quoted in full from the FDA-approved drug label published by openFDA, effective February 9, 2024. Matched to this product by RxNorm code. Cross-references to other sections of the full prescribing information have been removed, since they point to a document not shown here. Nothing else is changed: no sentence is shortened, reworded or summarised.

This page reproduces regulatory text for reference. It is not medical advice, and KenyRx is not a pharmacy or a prescriber. Talk to a doctor or pharmacist about whether a medicine is right for you.

See what it costs — price without insurance